Wide range of colours readily available to cater for colour coding needs.

 

  • Operating temperature of up to 80⁰C
  • Thickness is 0.15 mm.
  • Dielectric strength 39.4 kV/mm
  • Breaking strength is 2.8 kN/m

Product Description 

 

Temflex™ 1610 Electrical Tape is a quality, economical, general purpose vinyl insulating tape available in 10 colors. Temflex 1610 is designed for use in phase identification, color coding of motor leads and piping systems and for marking safety areas. It has excellent resistance to abrasion, moisture, alkalies, acid and varying weather conditions (including sunlight). It is a polyvinyl chloride (PVC) tape that has high wet dielectric strength, is conformable, and provides excellent mechanical protection with minimum bulk. 

 

Applications 

 

Protective jacketing for high voltage cable splices and repairs. • Harnessing of wires and cables • For indoor or outdoor applications • For above or below grade applications • Color coded for job identification and safety • 10 colors Typical Data/Physical Properties Test Method Typical Value Dielectric Strength* Standard Condition >1000 V/mil (>39,4 kV/mm) Thickness* 6 mils (0,15 mm) Elongation* 200% Breaking Strength* 16 lbs./in. (18,5 kg/cm) Adhesion* To Steel 16 oz./in. (1,75 N/10 mm) To backing 16 oz./in. (1,75 N/10 mm)

 

Installation Techniques 

 

The tape shall be applied in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape’s width to approximately 5/8 of its original width. On pigtail splices, the tape should be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cutthrough. Apply the tape with no tension on the last wrap to prevent flagging. 

 

Maintenance 

 

Temflex 1610 Electrical Tape is stable under normal storage conditions.

10 Pack - 3M Temflex PVC Electrical Tape 1610

SKU: 9310063048132
$29.95Price
GST Included |
Color: Black
  • 3M Temflex Electrical Tape 1610 is a general purpose vinyl insulating tape designed for use in phase identification, colour coding of motor leads and piping systems and for marking safety areas. It has very good resistance to abrasion, moisture, alkalis, acids and varying weather conditions.